====== Network Setup ======

===== Overview =====


===== FritzBox 7490 =====

=== temporary telnet ===

  * 'firmware update' with telnet.tar (from http://www.ip-phone-forum.de/showthread.php?t=280058&p=2104213&viewfull=1#post2104213)
  * get rid of nag message in web frontend: ''echo clear_id 87 > /proc/tffs''
  * edit static dhcp settings: <code>telnet fritz.box
multid -s
nvi /var/flash/ar7.cfg # search for 'statics' or 'landevices' or existing hostname
multid
</code>

===== Buffalo AirStation =====

  * supports printer, home office, second wifi
  * username: root
  * configuration (based on http://www.dd-wrt.com/wiki/index.php/Wireless_Access_Point)
    - LAN1 from Fritzbox connected to WAN of Buffalo Airstation
    - setup/ basic setup / WAN connection type: disabled
    - local IP address: 192.168.0.2 (temporary -- use DHCP from Fritzbox)
    - assign WAN port to switch: yes
    - DHCP server: disable
    - NTP client: disable
    - advanced routing / operating mode: router
    - wireless: set SSID + security settings
    - startup script: <code>[ ! -e /tmp/udhcpc ] && ln -s /sbin/rc /tmp/udhcpc
udhcpc -i br0 -p /var/run/udhcpc.pid -s /tmp/udhcpc -H test-wrt-wireless
route add default gw `nvram get wan_gateway`
hostname buffaloAS`nslookup \`ifconfig br0 | grep 'inet addr' |cut -f 2 -d ':'\` | grep 'Name:' | awk '{print $2;}' | cut -f 1 -d '.'`
if test `hostname` != `nvram get wan_hostname`; then 
     nvram set wan_hostname=`hostname`;
     nvram set router_name=`hostname`;
     nvram commit;
fi</code>